Log masuk Sertailah Percuma
1 / 7
PIP PI PIP
| Model No. : | HONYPLAS-PI |
|---|---|
| Brand Name : | Honyplas |
Shenzhen, Guangdong, China
- Pengilang
- Pembekal Emas
- Pensijilan platform
- Pensijilan SGS
Penerangan Produk
Tiub polyimide untuk sensor perubatan, tahan panas, polyimide tekanan tinggi, tiub PI
Ciri -ciri tiub mikro Polyimide Tubing (Kapton) termasuk: kemunculan dan kebolehpercayaan unggul, fleksibiliti, rintangan dakwat, dan kekuatan lajur. Tiub mikroba polyimide adalah ultra-licin dan tidak aktif secara kimia.
Aplikasi biasa termasuk: Penebat dawai elektrik (untuk peralatan ujian siasatan), kateter kardiovaskular, peranti pengambilan urologi, aplikasi elektrik, fiberoptik, penghantaran dadah intravaskular, angioplasti belon, dan penghantaran stent.
Tiub perubatan polyimide ini digunakan secara meluas dalam pasaran peranti perubatan. Tiub polyimide menghantar tork, dan telus.
Lembaran data teknikal
| Item name | Polyimide tubing，high-pressure polyimide, pi tubing |
| Texture of material | Polyimide |
| Heat resistant | 400℃（752℉） |
| Tensile strength | Not less than 150MPa |
| High temperature | 200℃-280℃ |
| Operating temperature | -60℃-280℃ |
| Electrolyte strength (voltage resistance) | 2500V/MH.25℃ 60 CYCLE |
|
2000v/MH.150℃ 6O CYCLE |
|
| Water absorbency | 1%MAK.24Hr Immersion 25℃ |
| Corrosion effect on copper | Negligibic |
| Solubility in industrial solvents or dissolved substances such as acids, tinas, oils, paints, etc. | Insoluble |
| Antibacterial, anti-corrosive | Good |
| Toughness (folding, bending, tearing, etc.) | Good |
| Flame retardancy | Slow to self-extinguishing |
| Heat shrinkability | Less tnan 9% |
| Epidermal strength | 400g/cm2(MIN) |
| Insulation | 50Hz 2500v/min no breakdown |
| Color | Transparent.Misty.Golden |
| Other | The surface is bright, without burrs or pitting, and there are no impurities inside and outside the tube. |
Proses: gegelung rata, lingkaran, penyemperitan
Diameter dalaman: 0.2-25mm
Panjang: satu meter biasa, disesuaikan
Ketebalan dinding: roll rata 0.05-0.2mm; Spiral 0.06-0.25mm
Squeeze 0.02-0.35mm
| Diameter/mm | Inside diameter/mm | Thickness/mm | Outside diameter/mm |
| 0.2 | 0.2±0.02 | 0.02/0.04±0.01 | 0.29 |
| 0.25 | 0.25±0.02 | 0.02/0.04±0.01 | 0.34 |
| 0.3 | 0.3±0.02 | 0.02/0.04±0.01 | 0.39 |
| 0.35 | 0. 35±0.02 | 0.02/0.04±0.01 | 0.44 |
| 0.4 | 0.4±0.02 | 0.03/0.06±0.01 | 0.48 |
| 0.45 | 0.45±0.02 | 0.03±0.02 | 0.51 |
| 0.5 | 0.5±0.02 | 0.03/0.06±0.02 | 0.63 |
| 0.6 | 0.6±0.02 | 0.03/0.06±0.02 | 0.72 |
| 0.7 | 0.7±0.02 | 0.03/0.06±0.02 | 0.83 |
| 0.75 | 0.75±0. 02 | 0.03±0.02 | 0.83 |
| 0.8 | 0.8±0.02 | 0.03/0.06卤0.02 | 0.92 |
| 0.85 | 0.85±0.02 | 0.03±0.02 | 0.95 |
| 0.9 | 0.9±0.02 | 0.06±0.02 | 1.03 |
| 1 | 1.0±0.02 | 0.04/0.06±0.02 | 1.13 |
| 1.1 | 1.1±0.02 | 0.06±0.02 | 1.23 |
| 1.2 | 1.2±0.02 | 0.03/0.06±0.02 | 1.33 |
| 1.3 | 1.3±0.02 | 0.06±0.02 | 1.43 |
| 1.5 | 1.5±0.02 | 0.06±0.02 | 1.63 |
| 1.6 | 1.6±0.02 | 0.06±0.02 | 1.73 |
| 2 | 2.0±0.02 | 0.06±0.02 | 2.13 |
| 2.5 | 2.5±0.02 | 0.06±0.02 | 2.63 |
| 3 | 3.0±0.02 | 0.06±0.02 | 3.12 |
Permohonan
Ia digunakan terutamanya untuk perlindungan penebat komponen elektrik. Seperti penebat pelindung terma motor, penebat sendi wayar yang dilancarkan motor. Oleh itu, ia boleh digunakan dalam sendi kimpalan, sendi, gegelung, transformer, motor, wayar, unsur pemanasan elektrik, kapasitor, relay telefon dan penebat suhu lain dan perlindungan mekanikal.
Shenzhen, Guangdong, China
- Pengilang
- Pembekal Emas
- Pensijilan platform
- Pensijilan SGS
Hantarkan pertanyaan anda kepada pembekal ini