1 / 5
Model No. : | ZT-002 |
---|---|
Brand Name : | Zhongtuo |
Material Thickness : | 1.5 To 2.0mm |
Cangzhou, Hebei, China
Penerangan Produk
Apakah saluran strut?
Saluran perisai biasanya dibentuk oleh lembaran logam, dilipat ke dalam bentuk saluran terbuka dengan bibir dalam-lengkung untuk memberikan kekukuhan tambahan dan sebagai lokasi untuk memasang komponen yang sambung. Strut biasanya mempunyai lubang semacam di dalam pangkalan, untuk memudahkan penyambungan atau penyepit tegangan ke struktur bangunan yang mendasari. (diambil dari Wiki)
Mesin membentuk roll automatik uni strut boleh digunakan untuk membuat saluran saluran 41x21, 21x21, saluran bayangan, saluran C dalam batch dan keseluruhan proses sepenuhnya secara automatik.
Berikut adalah beberapa profil lukisan saluran uni strut untuk rujukan anda :
Di pasaran, terdapat saluran C Slotted biasa, dan kemudian hanya menyimpan lubang tebukan bahagian.
Di bahagian berikut, semak paramters mesin :
KOMPONEN MESIN :
1 |
Manualdecoiler |
1 set |
2 |
Leveling Machine |
1 set |
3 |
Roll Forming |
1 set |
4 |
Hydraulic Cutting |
1 set |
5 |
PLC Control System |
1 set |
6 |
Hydraulic Station |
1 set |
7 |
Run-out Table-(Un-powered) |
1 set |
1. Decoiler 3 Ton passive de-coiler with brake device Outside diameter of coil: 550mm Inside diameter of the coil: 450mm |
||
2. Feeding and leveling rollers: Rollers: 4 steps, leveling Rollers: 9pcs Diameter: 80mm Leveling thickness: 3.5mm
Feeding
speed: 20m/min
Punching device
|
||
3. Main forming machine : 1) Forming steps: 18 steps 2) Outer diameter: 70mm 3) Machine frame (type): memorial arch frame, Thickness of memorial arch frame: 30mm
4)
Roller information: B. Quenched degree: 56-58°C 5) Shaft material: 45# steel with heat treat and hard chrome plated on the surface 6) Main motor power: 18.5kw, Reducer ratio: 1:14, Reducer Type: Hardened reducer 7) With cooling device
|
||
4. Siemens control system with English 1). PLC brand: Siemens 2). Transducer brand: Siemens 3). Automatic length and quantity measurement 4). Stop control switch, to ensure the safety of production 5). Control station: Used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 6). Error for length needs to be easy to adjust. |
||
5. Gearbox transmission: Gearbox transport A. Gear material: 42CrMo B. Processing technical: hardening gear grinding processing C. Gear lubrication system: automatic oil drip by computer control, oil drip time and amount can be controlled according the needs. D.Gear cooling system: Automatic cooling circulation tank, which can guarantee not to exceed the gear temperature limit.
|
||
7. Non-stop hydraulic cutting device
1).
Servo motor power: 5.5kw 4). Hydraulic cutting after forming, no distorting or wasting. High level safety factor. |
||
|
Cangzhou, Hebei, China
Hantarkan pertanyaan anda kepada pembekal ini